Skip to content
Circuits Playground
Menu

Voltage Divider Calculator

Calculate the output of a two-resistor voltage divider, or pick resistors to bring a 5 V signal down to a safe 3.3 V level for ESP32 and Raspberry Pi Pico pins.

Vout = Vin × R2 / (R1 + R2)

V
Ω
Ω
Output voltage
3.33 V
Divider current
1.667 mA
Ratio
0.667
Safe for 3.3 V pin?
No, reduce R2 or raise R1

Frequently asked questions

How do I convert 5 V to 3.3 V with resistors?

Use R1 = 1 kΩ (from the 5 V signal) and R2 = 2 kΩ (to ground): 5 × 2 / 3 = 3.33 V. This works for slow signals such as the HC-SR04 Echo pin.

Can a voltage divider power a module?

No. A divider's output sags under load. Use it only for signals or measurements, and use a regulator or buck converter for power.

Next: try it in a real circuit with the Circuit Builder, or browse projects.