Battery Life & Power Budget Calculator
Estimate how long an ESP32, Arduino or Pico project runs on a battery, using active current, sleep current and duty cycle.
Hours = capacity (mAh) × efficiency / average current (mA)
- Average current
- 8.93 mA
- Estimated battery life
- 7.9 days
- Always-on life (no sleep)
- 14.2 hours
- Duty cycle
- 0.83 %
Typical currents are estimates; measure your own board with a multimeter for accurate results. Sensor and display currents add to the active and sleep figures.
Frequently asked questions
How long will an ESP32 run on a battery?
Always on with Wi-Fi (~120 mA average), a 2000 mAh battery lasts about 13 hours. Waking for 5 seconds every 10 minutes with deep sleep at ~0.15 mA (bare module) extends this to weeks; dev boards draw more in sleep because of their USB chip and regulator.
Why does my dev board drain the battery in deep sleep?
The USB-serial chip, power LED and voltage regulator on dev boards draw several milliamps even when the microcontroller sleeps. Use a bare module or a low-quiescent regulator for long battery life.
Next: try it in a real circuit with the Circuit Builder, or browse projects.