ESP32 DS18B20 Waterproof Temperature Logger
Log water or soil temperature with a waterproof DS18B20 probe and an ESP32, viewable over Wi-Fi.
ESP32 DevKit V1 (30-pin) · 35 min
For: Second- and third-year engineering students (ECE, EEE, CSE, IT, mechanical, mechatronics)
Quick answer
Mini projects that you can finish in a few weeks and extend later. Each one comes with an editable circuit, automatic wiring checks and a code-generation prompt.
Log water or soil temperature with a waterproof DS18B20 probe and an ESP32, viewable over Wi-Fi.
ESP32 DevKit V1 (30-pin) · 35 min
Detect movement with an HC-SR501 PIR sensor and flash an LED and sound a buzzer on a Raspberry Pi Pico.
Raspberry Pi Pico · 30 min
Measure distance with an HC-SR04, show it on a 16×2 I2C LCD and beep when something gets too close.
Arduino Uno R3 · 40 min
Show live temperature and humidity from a DHT22 on a 0.96" I2C OLED using the tiny ESP32-C3 Super Mini.
ESP32-C3 Super Mini · 45 min
Read a capacitive soil moisture sensor with an ESP32 and switch a small 5 V water pump through a relay when the soil gets dry.
ESP32 DevKit V1 (30-pin) · 1 h
Have your own idea? Design it with the AI assistant or draw it in the Circuit Builder.
Each project page has a DOCX report export and viva questions.
Smart irrigation, a weather station with OLED display, a PIR security alarm and an ultrasonic water-level monitor are all achievable in a few weeks with an ESP32 or Arduino.
Use the ESP32 if the project needs Wi-Fi or Bluetooth; use the Arduino Uno for simple 5 V sensor projects. The ESP32 runs at 3.3 V logic, so check sensor voltages.