ESP32 Smart Irrigation System
Read a capacitive soil moisture sensor with an ESP32 and switch a small 5 V water pump through a relay when the soil gets dry.
ESP32 DevKit V1 (30-pin) · 1 h
Quick answer
Start with a beginner project like the ones below, which cost roughly ₹500–₹1,500 in parts and come with free circuit diagrams and wiring tables.
Soybean and wheat farming across the Malwa plateau makes irrigation automation a relevant theme. Motion alarms are a popular beginner build for diploma and first-year students.
Read a capacitive soil moisture sensor with an ESP32 and switch a small 5 V water pump through a relay when the soil gets dry.
ESP32 DevKit V1 (30-pin) · 1 h
Detect movement with an HC-SR501 PIR sensor and flash an LED and sound a buzzer on a Raspberry Pi Pico.
Raspberry Pi Pico · 30 min
Log water or soil temperature with a waterproof DS18B20 probe and an ESP32, viewable over Wi-Fi.
ESP32 DevKit V1 (30-pin) · 35 min
Measure distance with an HC-SR04, show it on a 16×2 I2C LCD and beep when something gets too close.
Arduino Uno R3 · 40 min
Show live temperature and humidity from a DHT22 on a 0.96" I2C OLED using the tiny ESP32-C3 Super Mini.
ESP32-C3 Super Mini · 45 min
Affiliating university in Madhya Pradesh: Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV).
Indian online hobby-electronics stores deliver to Indore, usually within a few days. Every project page has a parts list with buy links and an estimated cost.
Students at IIT Indore, SGSITS, IET DAVV can use these projects as mini projects, lab assignments or the base of a final-year project.
Most beginner projects cost about ₹500–₹1,500 in parts, plus about ₹150 for a breadboard and jumper wires. Each project page shows a detailed estimate.
Market and college information is for orientation and may change. Spotted an error? Tell us.