Communication modules
NEO-6M GPS Module (GY-NEO6MV2)
u-blox NEO-6M GPS receiver with antenna; sends NMEA sentences over UART at 9600 baud.
- Supply (VCC)
- 3.3–5 V, ~50 mA
- Manufacturer
- u-blox (module) / generic board
- Reference
- Datasheet / documentation
- Catalogue ID
- neo6m-gps v1
Pinout
| Pin | Type | Details |
|---|---|---|
| VCC | Power input | 3.3–5 V |
| RX | Digital input | - |
| TX | Digital output | outputs 3.3 V |
| GND | Ground | - |
Wiring notes
- Connect GPS TX → board RX and GPS RX → board TX (use a second/software serial port, not the USB serial pins).
- The first fix can take a few minutes outdoors.