Actuators
L298N Dual Motor Driver
Dual H-bridge for two DC motors (or one stepper), up to ~2 A per channel, with on-board 5 V regulator.
- Supply (12V (VS))
- 5–35 V
- Manufacturer
- STMicroelectronics (IC) / generic module
- Reference
- Datasheet / documentation
- Catalogue ID
- l298n-motor-driver v1
Pinout
| Pin | Type | Details |
|---|---|---|
| 12V (VS)VS | Power input | 5–35 V |
| GND | Ground | - |
| 5V | Power output | 5 V · max ~500 mA · Regulator output when the 5V-EN jumper is fitted and VS ≤ 12 V. Remove the jumper for VS > 12 V. |
| ENA | Digital input | - |
| IN1 | Digital input | - |
| IN2 | Digital input | - |
| IN3 | Digital input | - |
| IN4 | Digital input | - |
| ENB | Digital input | - |
| OUT1 (A)OUT1 | Relay contact | - |
| OUT2 (A)OUT2 | Relay contact | - |
| OUT3 (B)OUT3 | Relay contact | - |
| OUT4 (B)OUT4 | Relay contact | - |
Wiring notes
- The L298N drops about 2 V: a 6 V supply gives motors only ~4 V. Use 7–12 V for TT motors, or a modern driver (TB6612FNG) for battery projects.
Safety
- The heatsink gets hot at high current.
- Join the driver GND to the board GND.