Sensors
ACS712 Current Sensor (5 A)
Hall-effect current sensor module: analog output centred at VCC/2, 185 mV per amp.
- Supply (VCC)
- 4.5–5.5 V, ~10 mA
- Manufacturer
- Allegro (sensor) / generic module
- Reference
- Reference pending review
- Catalogue ID
- acs712-5a v1
Pinout
| Pin | Type | Details |
|---|---|---|
| VCC | Power input | 4.5–5.5 V |
| OUT | Analog output | output level = supply voltage |
| GND | Ground | - |
| IP+IP1 | Relay contact | Put the sensor in series with the load (low-voltage DC). |
| IP−IP2 | Relay contact | - |
Wiring notes
- Output swings up to ~3.4 V at full scale; on 3.3 V boards use a voltage divider.
Safety
- Use only on low-voltage DC circuits in student projects. Mains current measurement must be done by a qualified person.