ESP32 DS18B20 Waterproof Temperature Logger
Log water or soil temperature with a waterproof DS18B20 probe and an ESP32, viewable over Wi-Fi.
ESP32 DevKit V1 (30-pin) · 35 min
Quick answer
| Feature | ESP32 DevKit V1 (30-pin) | Raspberry Pi Pico |
|---|---|---|
| Logic voltage | 3.3 V | 3.3 V |
| 5 V tolerant inputs | No | No |
| Wi-Fi | Yes | No |
| Bluetooth | Yes | No |
| GPIO pins (on this module) | 25 | 26 |
| Analog (ADC) pins | 15 | 3 |
| PWM-capable pins | 21 | 26 |
| I2C pins | Any GPIO (matrix) | Several fixed pin pairs |
| Typical price in India | ~₹350 | ~₹400 |
Pin counts are for the exact module in our library (ESP32 DevKit V1 (30-pin); Raspberry Pi Pico). Prices are typical online prices for clone boards and vary.
Log water or soil temperature with a waterproof DS18B20 probe and an ESP32, viewable over Wi-Fi.
ESP32 DevKit V1 (30-pin) · 35 min
Detect movement with an HC-SR501 PIR sensor and flash an LED and sound a buzzer on a Raspberry Pi Pico.
Raspberry Pi Pico · 30 min
Read a capacitive soil moisture sensor with an ESP32 and switch a small 5 V water pump through a relay when the soil gets dry.
ESP32 DevKit V1 (30-pin) · 1 h
Choose the ESP32 DevKit V1 (30-pin) if your project needs Wi-Fi (dashboards, notifications, MQTT, web servers).
ESP32 DevKit V1 (30-pin) pins are 3.3 V and not 5 V tolerant. Power the sensor at 3.3 V if it allows, or use a voltage divider or level shifter on signal lines going into the board.