BeginnerRule-checked
Arduino Ultrasonic Distance Meter with LCD
Measure distance with an HC-SR04, show it on a 16×2 I2C LCD and beep when something gets too close.
Arduino Uno R3 · 40 min
Quick answer
| Feature | Arduino Uno R3 | Wemos D1 Mini (ESP8266) |
|---|---|---|
| Logic voltage | 5 V | 3.3 V |
| 5 V tolerant inputs | Yes | No |
| Wi-Fi | No | Yes |
| Bluetooth | No | No |
| GPIO pins (on this module) | 20 | 12 |
| Analog (ADC) pins | 6 | 1 |
| PWM-capable pins | 6 | 10 |
| I2C pins | Fixed pins | Any GPIO (matrix) |
| Typical price in India | ~₹450 | ~₹220 |
Pin counts are for the exact module in our library (Arduino Uno R3; Wemos D1 Mini (ESP8266)). Prices are typical online prices for clone boards and vary.
Measure distance with an HC-SR04, show it on a 16×2 I2C LCD and beep when something gets too close.
Arduino Uno R3 · 40 min
Choose the Wemos D1 Mini (ESP8266) if your project needs Wi-Fi (dashboards, notifications, MQTT, web servers).
Wemos D1 Mini (ESP8266) pins are 3.3 V and not 5 V tolerant. Power the sensor at 3.3 V if it allows, or use a voltage divider or level shifter on signal lines going into the board.